| 測試電流 | |
| AC 3A ~ 32A |
| 測試電壓 |
| zui大 8V AC Typically |
| 量測阻抗范圍 |
| 0 to 0.12Ω, 0 to 0.6Ω共 2 檔 |
| 量測準確度 |
| 3A ~ 5A, +10% 滿刻度
5A ~ 32A, +5% 滿刻度 |
| 電流表 |
| 顯示測試電流及警告設限值 |
| 阻抗表 |
| 顯示測試電阻及 Fail 與 SUBTRACTION 設定值 |
| 切換開關 |
| Zero-start operating switch |
| 計時器 |
| 1S, 10S, 1MIN, 10MIN 共 4 檔 |
| 警告 |
| Monitor the variation test current, when the test current is beyond+10% of the setting value, the warning operation will proceed.
警告設定范圍 3A ~ 32A |
| SUBTRACTION |
| The resistance of testing line can be subtracted from the test value
The subtraction range from 0 ~ 0.1Ω
準確度 +10% |
| GO-NOGO判定設定 |
| If the test reading value is beyond the setting value, the fail will be acting, otherwise the pass will proceed.
設定值范圍，為測試檔位的 5% ~ 100%
準確度 +15% 滿刻度 (3A ~ 5A)；+10% 滿刻度 (5A ~ 32A) |
| 遠端控制 |
| 高電壓輸入 11V ~ 15V, 低電壓 0 ~ 4V 及低電流輸入 20mA 以下 |
| 測試模式 |
| 正常模式： 當警告聲響起，測試停止
連續模式：當警告聲響起，測試仍持續進行 |
| 蜂鳴器 |
| 當測試失敗時，提供蜂鳴聲 |
| 測試頻率 |
| 50Hz 或 60Hz independent 視電源電壓而定 |
| 輸出信號 |
| TEST, GO, NG, WARNING, READY, MONITOR |
| 使用電源 |
| 交流 100V/120V/220V/240V+10%, 50/60Hz |
| 附件 |
| 電源線 x 1,
操作手冊 x 1,
測試線 GHT-115 x 1 |
| This instrument is designed to test Grounding continuity resistance of the monitor, Switching power supplies, Power cord and Electronic appliances. |
安規測試儀特點
在線客服會員_a.png)